Releasing MMI using SAT
●
Busying out previously busied out trunks
●
Checking for translation corruption with SAT (main server only)
●
Resolving alarms
●
Backing up recovery system files on the active server
●
Releasing alarm suppression on the media server (optional)
●
Logging off all administration applications
●
Disconnecting from the active media server
●
Connecting to the standby media server
●
Backing up files on the standby media server
●
Releasing alarm suppression on the media server
●
Logging off the administration applications on the standby media server
●
Registering Avaya Communication Manager
●
Current configuration tasks:
Connecting to the active media server
If you are on site, connect to the services port on the back of the active media server.
If you are off site, log on to the active media server with the actual IP address of the media
server.
Starting a SAT session
To start a SAT session.
1. Open a terminal emulation application, such as MS HyperTerminal.
2. Type 192.11.13.6 5023 and press Enter.
3. Log on as craft or dadmin.
on page 275
on page 276
on page 276
on page 276
on page 277
on page 277
on page 277
on page 278
on page 278
on page 278
on page 279
Current configuration tasks:
on page 276
on page 278
Issue 2.1 June 2006
259