Avaya S8100 Series Manual page 1200

Converting IP-PNC port networks with simplex control to duplicated control
Verifying IPSI translations
To verify IPSI translations:
1. Type list ipserver-interface. Press Enter.
2. Verify that the ISPI circuit pack(s) are translated.
The State of Health - C P E G column shows 0.0.0.0 for each healthy IPSI. If a "1" shows
in any position, you must troubleshoot the problem.
Tip:
The pattern 0.1.1.0 usually means that a cabinet type is administered
Tip:
incorrectly or a connectivity problem exists, such as an incorrectly terminated
cable.
Upgrading IPSI firmware, if necessary
Note:
For information about upgrading the IPSI firmware, see Upgrading firmware on
Note:
the IPSIs in the Upgrades section of this book.
To upgrade firmware on the IPSIs:
1. Open the Maintenance Web Interface.
2. Copy IPSI firmware to the media processor hard drive. Use Download Files under
Miscellaneous.
3. Determine which IPSIs you need to upgrade, using IPSI Version under IPSI Firmware
Upgrades.
4. Download the new firmware to the IPSIs. Use Download IPSI Firmware.
5. Use Activate IPSI Upgrade to activate the new firmware.
6. When the IPSIs are recovered, use IPSI Version to verify the firmware versions.
1200 Upgrading, Migrating, and Converting Media Servers and Gateways