Avaya S8100 Series Manual page 824

Migrating a DEFINITY ONE/S8100 to an S8700-Series Media Server with IP-PNC
Using static addressing
You can administer static IP addresses for the IPSI circuit packs. You administer the addresses
directly through the Ethernet port connection on the IPSI faceplate switch which is the top port
(Figure 54: Connecting directly to the IPSI
Figure 54: Connecting directly to the IPSI
cadlipsi KLC 031502
Figure notes:
1. Services laptop
2. PCMCIA Network Interface Card (NIC)
Note:
Ensure that you have the IPSI password before you continue.
Note:
Clearing the ARP cache on the laptop computer
You might need to clear the Address Resolution Protocol (ARP) cache before you enter a new
IP address. This need depends on the operating system on your laptop computer. If you enter
an IP address and your computer cannot connect, you might need to clear the cache.
824 Upgrading, Migrating, and Converting Media Servers and Gateways
1
2
on page 824).
3
4
3. NIC adapter cable (if necessary)
4. CAT5 cross-over cable to IPSI
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K