Avaya S8100 Series Manual page 1125

IPSI slot locations (continued)
Carrier or Gateway
MCC1 EPN containing three
PNs
MCC1 EPN containing four PNs
MCC1 EPN containing five PNs
Installing the new circuit packs
!
Important:
In some cases, you might need to remove an existing circuit pack from a slot
Important:
before you install the new circuit pack. Remove these existing circuit packs last,
after you install, cable, and administer all the new circuit packs that go into empty
slots. To remove existing circuit packs, follow the procedures in
duplication, if necessary
administration
Tip:
The TN2312BP, TN2602AP, and TN799D circuit packs all support hot-plug-in.
Tip:
That is, they can be inserted into a live system without disrupting call processing.
Primary
Tone Clock slot
●
(A00)
B02
●
D02 (single control)
●
E02 (duplicated
●
control)
Tone Clock slot
●
(A00)
B02
●
C02
●
D02 (single control)
●
E02 (duplicated
●
control)
Tone Clock slot
●
(A00)
B02
●
C02
●
D02
●
E02
●
on page 1133 and
on page 1134.
Slot Number
Secondary, if duplicated
control, for S8700 series
only
Control duplication is not
supported with three PNs.
D01 (duplicated control)
Control duplication is not
supported with four PNs
D01 (duplicated control)
Control duplication is not
supported with five PNs
Disabling PNC
Removing fiber-related
Issue 2.1 June 2006
Conversion Tasks
2 of 2
1125