Avaya S8100 Series Manual page 1153

Task
8.
9.
10. Set time, date, and
time zone.
See "Verifying Time,
Date, and Timezone"
in Chapter 12.
11. Install post-conversion
service pack file, if any.
See "Installing
post-upgrade
Communication
Manager service pack
file from your laptop, if
any" in Chapter 12.
12. Install the new ICC
license file.
See "Installing the
updated license file" in
Chapter 12.
13. Install the new
authentication file.
See "Installing the
updated license file" in
Chapter 12.
14. Configure server.
See "Configuring the
S8300" in Chapter 9.
Steps/Comments
Install IA770 and administer CWY1
●
integration according to Avaya IA770
INTUITY AUDIX Messaging Application,
Release 3.0, Installation, Upgrades, and
Troubleshooting (11-300532)
Avaya IA770 INTUITY AUDIX Messaging
Application, Release 3.0, Installation, Upgrades,
and Troubleshooting (11-300532)
Set the time zone of the new ICC, and all LSPs
under the ICC's control must be set to the new
ICC's time zone.
Fill in each Configure Server screen with
●
data for the ICC. Some of the configuration
data will be the same as that for the LSP.
On the Configure Local Survivable
●
Processor screen (page 123), select the
radio button that indicates this is NOT a
local survivable processor.
Introduction
Issue 2.1 June 2006 1153