Avaya S8100 Series Manual page 977

Table 17: Network Interface Card usage
7. Click Continue.
8. In the Corporate LAN Interface section, record the following information for later use:
IP addresses (under the Corporate LAN Interface area)
●
Subnet mask (under the Corporate LAN Interface area)
●
Default gateway (under the Corporate LAN Interface area)
●
9. Click Close Window to exit the Configure Server window.
Busying out the standby S8700 or S8710 Media Server
To busyout the S8700 or S8710 Media Server:
1. On the Maintenance Web Interface, click Busy Out Server.
The system displays the Busy Out Server window.
2. On the Busy-Out Server window, click Busy Out.
The system displays the Busy Out Server Results window.
Shutting down the standby S8700 or S8710 Media Server
!
CAUTION:
Ensure that you are connected to the standby S8700 or S8710 Media Server.
CAUTION:
Proceeding with the following steps and being connected to the incorrect media
server can result in service disruption.
To shut down the standby S8700 or S8710 Media Server:
1. Under Server, click Shutdown Server.
The system displays the Shutdown This Server window.
On the standby S8700 or S8710 Media Server
Issue 2.1 June 2006 977