Avaya S8100 Series Manual page 683

Installing Expansion Interface circuit packs
You must replace any expansion interface circuit packs in the PPN.
If the existing PPN has TN776 or TN570 Expansion Interface circuit packs, you must
●
replace them with a TN570B Expansion Interface vintage 7 or later circuit pack.
If this system includes an Enterprise Survivable Server (ESS), replace the circuit packs
●
with a TN570D or later Expansion Interface circuit pack.
To install the Expansion Interface circuit packs:
1. Remove the existing circuit pack.
2. Place the circuit pack in an antistatic carrier or bag.
3. Insert the TN570B Expansion Interface vintage 7 or later circuit pack into the EXPN INTFC
slots (A01, A02).
4. Repeat Steps 1 and 2 for each PN that does not contain TN570B Expansion Interface
vintage 7 or later circuit packs.
Completing circuit pack replacement
For standard (duplex) reliability configurations, repeat
page 717 for each port network that receives a TN2312BP.
For high-reliability and critical-reliability configurations, repeat
configuration on page 720 and
page 722 for each port network that receives a TN2312BP.
Migrating translations
This section describes how to migrate translation files from the existing system to the new
S8700 Series Media Server.
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
Connecting the CAT5 cables to the IPSI circuit packs
Migrating translations
Duplex reliability configuration
High-reliability or critical-reliability
Issue 2.1 June 2006
on
on
683