Avaya S8100 Series Manual page 490

Migrating a DEFINITY Server SI Direct-Connect in an SCC to a Direct-Connect
Restoring translation files
To restore translation files:
1. Under Data Backup/Restore, click View/Restore Data.
2. Select Local Directory and click View. The field automatically shows the default directory.
3. Select the first file. The latest file might be at the top of the list.
4. Select Force restore if server name mismatch and Force restore if backup version
mismatch.
5. Click Restore to restore the translation files.
6. Click Restore Status.
7. Select the first file and then scroll down and click Review Status to see the results of the
restore.
When the restore process completes, the screen displays Restore is finished.
8. Use Native Configuration Manager or Avaya Site Administration to start a SAT session.
9. Type reset system 4. Press Enter to load the restored translations.
If the restore process fails, the system displays an error message that states the reason for the
failure. The translation file is not restored. You must resolve the reason for the failure and restart
the process.
Administering the IPSIs
To administer the IPSIs:
1. Type change system-parameters ipserver-interface. Press Enter
2. Verify that the Primary Control Subnet Address field is correct.
The subnet address must match the most significant three octets (the first three groups of
digits in the subnet address) of the server IP address that is listed on the control network
entry from the completed Electronic Preinstallation Worksheet (EPW).
An asterisk (*) to the right of the Subnet Address field means that although a subnet
address displays, this address is incorrect. Avaya Communication Manager does not have
the subnet information. After you verify the information shown on the screen, submit this
form with or without changes to update the Communication Manager with the correct subnet
information.
490 Upgrading, Migrating, and Converting Media Servers and Gateways