Avaya S8100 Series Manual page 656

Migrating from a DEFINITY Server SI in an SCC to an S8700-Series Media Server with Fiber-PNC
Premigration setup
The premigration team must complete the following tasks. If these tasks are not completed, do
not continue with the migration.
Some tasks need to be completed on site up to two weeks before starting the actual migration.
Freeze the translations.
●
Send the translations to STS.
●
Get the translations back from STS by e-mail.
●
For more information, see
When you are migrating from a DEFINITY system, complete the following additional task before
you start the migration:
Task
Determine which adapters
and cables you can reuse.
Replace any TN775/B/C
maintenance circuit packs.
About 2 weeks before the
migration, freeze the
translations.
Use a spare flash card to
collect the translations
locally.
656 Upgrading, Migrating, and Converting Media Servers and Gateways
Migration paths on page
Description
You cannot reuse the following items:
The 982LS Current Limiter (CURL) for an SI.
●
You must replace with the larger CFY1B CURL.
The C-LAN 259A adapter. You must use the
●
adapter for IP Media Processor for 100-Mbps
speed.
The CAT3 cable that is used with C-LAN. You
●
must use a CAT5 or better cable for 100-Mbps
speed.
Replace the TN775/B/C circuit packs with TN775D
circuit packs in any EPN that contains an IPSI.
For more information on where and how to send the
translations, contact the STS scheduling desk at
720-444-9418.
STS updates the translations to the latest version. This
process can take 2 weeks. STS returns the translation
reports and translation files to the project manager by
e-mail who sends them to the technical support
representative.
For forms and more information, contact the STS
scheduling desk at 720-444-9418.
652.
1 of 2