Avaya S8100 Series Manual page 925

8. Click Open.
Note:
If you have not connected to this particular server before, SSH prompts you to
Note:
accept the server host key. If you save this key when prompted, you will not be
prompted if you connect again later. If you do not save the key, PuTTY prompts
you the next time you connect to this server.
When connecting through the Services laptop interface on the server, if you save the
host key, the host will be identified as 192.11.13.6. If you later connect to a different
server through its laptop interface, this new host also appears as 192.11.13.6, but it
will have a different key. You get a prompt in this case because it appears that the host
key has changed.
9. If necessary, click Yes to accept the server's host key.
The system displays the PuTTY window.
10. Log in as craft.
Installing Communication Manager and restoring files
To install Communication Manager and restore files:
1. Repeat the procedures
network parameters
!
CAUTION:
Ensure you restore the files from media server 2. If you restore the files on media
CAUTION:
server 1, you can rename that media server as media server 2.
Installing the new license file and the Avaya authentication file
For a migration, you must load a new license file and an Avaya authentication file.
1. Under Security, click License File. Click Install the license previously downloaded, and
then click Submit to install the license file.
The system tells you that the license is installed successfully.
2. Under Security, click Avaya Authentication, and then click Install.
The system tells you that the authentication is installed successfully.
Turning on the media server
on page 916 and return here.
On the second S8710 Media Server
on page 910 through
Issue 2.1 June 2006
Configuring the
925