Avaya S8100 Series Manual page 1022

Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
Accessing the second S8720 Media Server
To access the second S8720 Media Server:
1. Open a browser and connect to the media server.
2. Log in. For more information, see
interface
3. Suppress all alarms.
Confirming the product ID on the first S8720 Media Server
To confirm the Product ID:
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
2. Log in as craft or dadmin.
3. At the prompt, type productid. Press Enter.
The productid should match the value record in
S8700 or S8710 Media Server
immediately.
Enabling CNC, if necessary
If the CNC status in
configured, do this procedure. Otherwise, go to
page 1022.
If using Control Network C (CNC):
Type cnc on. Press Enter.
●
Initializing Communication Manager
To initialize Communication Manager:
1. Type stop -acf. Press Enter to stop Communication Manager.
2. Type start -ac. Press Enter to start Communication Manager and load the translations.
1022 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 953.
Checking the CNC status
Accessing the media server maintenance web
Obtaining the Product ID on the active
on page 965. If value does not match, escalate the problem
on page 957 is Control Network C has been
Initializing Communication Manager on