JH
Replacing the bearings on the clutch housing
Cut the base of the plastic hollow needle located at the
centre of the bearing.
Fit tool B. Vi. 1165 and extract the bearing.
REFITTING
Fit the deflector and the bearing on the press flush with
the inner side of the housing.
Set the bearing with a mortise chisel.
MANUAL GEARBOX
Repairing the gearbox
Remove the primary shaft bearing guide using a 38 ∅
tube.
Refit the bearing guide using tool B. Vi. 1601.
19820
21-15
21
19819
19818