6 - 18
CLUTCH
5. Connect the clutch master cylinder fluid pressure
line (1).
6. Connect the clutch master cylinder fluid supply
hose (1).
7. Remove the clamp from the clutch master cylinder
supply hose.
8. Install the illumination control module (4).
9. Install the lower drivers side instrument panel (5)
(Refer to 23 - BODY/INSTRUMENT PANEL/IN-
STRUMENT PANEL ASSEMBLY - INSTALLATION).
10. Bleed the hydraulic clutch system (Refer to 6 -
CLUTCH - STANDARD PROCEDURE).
11. Check for proper clutch actuation.
ZH