Chrysler 2005 Crossfire SRT6 Service Manual page 548

7 - 4 COOLING - ELECTRICAL DIAGNOSTICS
*RADIATOR COOLING FAN INOPERATIVE (CONTINUED)
3.
CHECKING THE FUSED B(+) CIRCUIT
Turn the ignition off.
Disconnect the Radiator Fan Control Module harness connector.
Note: Check connectors — Clean/repair as necessary.
Turn the ignition on.
Measure the voltage of the Fused B(+) circuit at the Radiator Fan
Control Module harness connector.
Is the voltage above 11 volts?
Yes >> Go to 4
No >> Repair the Fused B(+) circuit for an open.
Perform POWERTRAIN VERIFICATION TEST - VER 3.
4.
CHECKING THE GROUND CIRCUIT
Turn the ignition off.
Measure the resistance between ground and the module Ground cir-
cuit.
Is the resistance below 5.0 ohms?
Yes >> Go to 5
No >> Repair the module Ground circuit for an open.
Perform POWERTRAIN VERIFICATION TEST - VER 3.
ZH