Toyota T100 1996 Service Manual page 509

INSPECTION PROCEDURE
1 Check voltage between terminal BATT of ECM connector and body ground.
LOCK
BATT (+)
For M/T
BATT (+)
For A/T
BE6653
P24217
P24330
NG
2 Check EFI fuse.
EFI Fuse
R/B No.2
OK
Check and repair harness or connector
between battery, EFI fuse and ECM.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS − ENGINE (5VZ−FE)
PREPARATION:
Remove the right cowl side trim (See page SF−61).
CHECK:
Measure voltage between terminal BATT of ECM connector
and body ground.
OK:
Voltage: 9 − 14 V
A00125
OK Check and replace ECM (See page IN−26).
PREPARATION:
Remove the EFI fuse from the R/B No.2.
CHECK:
Check continuity of EFI fuse.
OK:
Continuity
FI7107
NG Check for short in all harness and
components connected to EFI fuse.
DI−245