Ip Pim Bsr-Border; Ip Pim Bsr-Candidate - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0

ip pim bsr-border

Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip pim bsr-border
To return to the default value, use the no ip pim bsr-border command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Usage This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are
Information cleaned up by time out. Candidate RP advertisements can be cleaned using the clear ip
pim rp-mapping command.

ip pim bsr-candidate

Configure the PIM router to join the Bootstrap election process.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip pim bsr-candidate interface [hash-mask-length] [priority]
To return to the default value, use the no ip pim bsr-candidate command.
Parameters
interface
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
1237