ip ospf interface transit-delay
Configures the OSPF interface transit delay.
ip ospf interface {interface_name} transit-delay seconds
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
The estimated number of seconds required to transmit a link state update over this interface. This
command takes into account transmission and propagation delays and must be greater than 0.
Examples
-> ip ospf interface vlan-101 transit-delay 100
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfTransitDelay
page 22-44
The name of the interface.
The transit delay, in seconds. The valid range is 0–3600.
default
1
Displays the status and statistics of an OSPF interface.
OmniSwitch CLI Reference Guide
OSPF Commands
June 2012