Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 416

show lldp remote-system med
output definitions (continued)
Unknown Policy Flag
Tagged Flag
VLAN ID
Layer 2 Priority
DSCP Value
-> show lldp 2/47 remote-system med inventory
Remote LLDP Agents on Local Slot/Port 1/22:
Remote ID 1:
MED Hardware Revision = "1.2.12.3",
MED Firmware Revision = "6.3.4.1",
MED Software Revision = "4.2.1.11",
MED Serial Number
MED Manufacturer Name = "Manufacturer1",
MED Model Name = "Alc32d21",
MED Asset ID = "124421",
Remote ID 2:
MED Hardware Revision = "1.2.12.4",
MED Firmware Revision = "6.3.4.2",
MED Software Revision = "4.2.1.13",
MED Serial Number
MED Manufacturer Name = "Manufacturer2",
MED Model Name = "Alc32d41",
MED Asset ID = "124424",
output definitions
Remote ID
MED Hardware Revision
MED Firmware Revision
MED Software Revision
MED Manufacturer Name
MED Model Name
MED Asset ID
Release History
Release 7.1.1; command introduced.
Related Commands
show lldp local -port
show lldp local -system
page 9-38
Whether the network policy for the specified application type is cur-
rently defined or unknown.
Whether the specified application type is using a tagged or an
untagged VLAN.
The VLAN identifier (VID) for the port.
Layer 2 priority to be used for the specified application type.
DSCP value to be used to provide Diffserv node behavior for the spec-
ified application type.
= "32421",
= "32424",
The Index of the Remote Device.
The Hardware Revision of the endpoint
The Firmware Revision of the endpoint.
The Software Revision of the endpoint.
The Manufacturer Name of the endpoint.
The Model Name of the endpoint.
The Asset ID of the endpoint.
Displays per port information.
Displays local system information.
OmniSwitch CLI Reference Guide
802.1AB Commands
March 2011