Using Webview; Browser Compatibility; Logging In To Webview - Alcatel-Lucent OmniSwitch 9000 Series Getting Started Manual

Using WebView

OmniSwitch 9000 switches can be configured and monitored
using WebView, Alcatel-Lucent's Web-based device manage-
ment tool. WebView software is pre-installed in the switch;
you are not required to load additional software.
Note. Although WebView software is pre-installed, you
must first enable HTTP sessions for your switch before
you can log in. Refer to
page 22 for more information.

Browser Compatibility

WebView has been tested on the following Web browsers:
Internet Explorer 6.0 for Windows 2000, Windows NT,
•
and Windows XP
Netscape 4.79 for Solaris 2.8, and HP-UX 11.0
•
Netscape 7.1 for Windows 2000, Windows NT, and
•
Solaris 2.8
34 Using WebView
"Unlocking Session Types" on

Logging In to WebView

Note. Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See
page 22 for more information.
To access WebView and log in to a switch:
1 Open any Alcatel-Lucent-tested Web browser.
"Unlocking Session Types" on
May 2007