Tracking Location History; Checking Signal Strength To Client Location - Dell PowerConnect W-AirWave 7.6 User Manual

This view is focused on the wireless user enabling you quick resolution of a user's issues and therefore disables most
RF objects by default.
Users - only the user in focus is displayed
l
APs - only the access point in which the focus client is associated with is displayed
l
Radios - the heatmap represents only the radio to which the client in focus is associated
l
Rogues - all rogues are off
l
Client/Rogue Surveys - all surveys are off
l
Walls - all walls are displayed
l
Lines - client to AP of association
l
Labels - all labels are disabled
l

Tracking Location History

Select a client icon in the floor plan and select Display from the pop-up menu shown in
Figure 223:
Show Location History
A location history player, illustrated in
Figure 224:
Location History Player

Checking Signal Strength to Client Location

1. On a floor plan, locate the Signal Cutoff menu.
2. Select the desired signal level to display, as shown in
Figure 225:
Signal Cutoff dBm Dropdown Menu
Dell PowerConnect W-AirWave 7.6 | User Guide
Figure 224, appears at the bottom of the QuickView window.
Figure 225. The heatmap updates immediately.
Figure 223:
Using VisualRF | 291