No-Multicast; No-Registered-Multicast - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
interface
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
3030
®
OS for EX Series Ethernet Switches, Release 10.4
interface (all | interface-name) {
bandwidth bandwidth;
no-broadcast;

no-multicast;

no-registered-multicast;

no-unknown-unicast;
no-unregistered-multicast;
}
[edit ethernet-switching-options storm-control]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Enable and configure storm control on all interfaces or on the specified interface.
If you do not include the
bandwidth
percent of the combined broadcast, multicast, and unknown unicast streams.
The factory default configuration enables storm control on all switch interfaces at the
default level of 80 percent of the combined broadcast, multicast, and unknown unicast
streams.
all —All interfaces. The storm control settings configured with the
those interfaces that have not been individually configured for storm control.
—Name of an interface. The storm control settings configured with the
interface-name
interface-name option override any settings configured with the
The remaining statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring Storm Control to Prevent Network Outages on EX Series Switches
on page 3015
Understanding Storm Control on EX Series Switches on page 3013
statement, the storm control level defaults to 80
Copyright © 2010, Juniper Networks, Inc.
all option affect only
all option.