Vlan - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

vlan

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
vlan (all | vlan-name) {
interface interface-name;
}
[edit ethernet-switching-options unknown-unicast-forwarding]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement updated with enhanced
Release 9.5 for EX Series switches.
Specify a VLAN from which unknown unicast packets will be forwarded or specify that
the packets will be forwarded from all VLANS. Unknown unicast packets are forwarded
from a VLAN to a specific trunk interface.
The statement is explained separately.
interface
TIP: To display a list of all configured VLANs on the system, including VLANs
that are configured but not committed, type
configuration mode command line. Note that only one VLAN is displayed for
a VLAN range.
all—All VLANs.
—Name of a VLAN.
vlan-name
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
show vlans on page 1737
show ethernet-switching table on page 1723
Configuring Unknown Unicast Forwarding (CLI Procedure) on page 3017
Verifying That Unknown Unicast Packets Are Forwarded to a Trunk Interface on page 3019
Understanding Unknown Unicast Forwarding on EX Series Switches on page 3014
Chapter 97: Configuration Statements for Rate Limiting
(CLI completion feature) functionality in Junos OS
?
after
?
or in your
vlan vlans
3037