Tcp Connection Details - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual

For example, sample output may include:
TCP Connection The TCP connection details includes:
Details
Table 3-7 TCP Connection Details
TCP Connection
S.No Details
1. tcpConnState
2. tcpConnLocal Address Specifies the local IP address for this TCP
3. tcpConnLocalPort
4. tcpConnRemAddress
5. tcpConnRemPort
STRM SNMP Agent
Description
Specifies the state of this TCP connection. The only
value that is configurable using a management station
is deleteTCB(12). Accordingly, it is appropriate for an
agent to return a badValue response if a
management station attempts to set this object to any
other value.
If a management station sets this object to the value
deleteTCB(12), the TCB (as defined in RFC 793) of
the corresponding connection on the managed node
is deleted, resulting in immediate termination of the
connection. As an implementation-specific option, a
RST segment may be sent from the managed node to
the other TCP endpoint (note however that RST
segments are not sent reliably).
connection. In the case of a connection in the listen
state that is willing to accept connections for any IP
interface associated with the node, the value 0.0.0.0
is used
Specifies the local port number for this TCP
connection.
Specifies the remote IP address for this TCP
connection
Specifies the remote port number for this TCP
connection.
TCP Details 35