Ip Slb Probe Retries - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip slb probe retries

Configures the number of Server Load Balancing (SLB) probe retries that are performed before deciding
that a server is out of service.
ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}
retries retries
Syntax Definitions
probe_name
ftp
http
https
imap
imaps
nntp
ping
pop
pops
smtp
tcp
udp
retries
Defaults
parameter
retries
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip slb probe mail_server smtp retries 5
page 26-24
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an FTP probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies an IMAP probe.
Specifies an IMAPS probe.
Specifies an NNTP probe.
Specifies a ping probe.
Specifies a POP probe.
Specifies a POPS probe.
Specifies an SMTP probe.
Specifies a TCP probe.
Specifies a UDP probe.
Specifies the number of retries (0–255).
default
3
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012