Server Load Balancing Commands
show ip slb cluster server
Displays detailed statistics and configuration information for a single physical server in a Server Load
Balancing (SLB) cluster.
show ip slb cluster cluster_name server ip_address
Syntax Definitions
cluster_name
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
Specifying a value for the cluster_name and ip_address parameters is required.
Examples
-> show ip slb cluster Intranet server 128.220.40.4
Cluster cl1
VIP 128.220.40.205
Server 128.220.40.4
Admin weight
MAC addr
Slot number
Port number
Admin status
Oper status
Probe
Availability time (%)
Ping failures
Last ping round trip time (milliseconds) : 20,
Probe status
Output fields are described here:
output definitions
Cluster
VIP
Server
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) cluster.
Specifies the IP address for the physical server.
The name of the Server Load Balancing (SLB) cluster.
The virtual IP (VIP) address for this Server Load Balancing (SLB)
cluster.
The IP address for this physical server.
June 2012
: 3,
: 00:00:1f:40:53:6a,
: 1,
: 4,
: Enabled,
: In Service,
: None,
: 95,
: 0,
: OK,
page 26-39