Ip Slb Cluster Probe - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip slb cluster probe

Configures a probe for a Server Load Balancing (SLB) cluster.
ip slb cluster cluster_name probe probe_name
Syntax Definitions
cluster_name
probe_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
You must create the probe with the
Examples
-> ip slb cluster mail_servers probe mail_server_probe
Release History
Release 6.1; command was introduced.
Related Commands
show ip slb clusters
ip slb probe
show ip slb cluster
ip slb server ip cluster
MIB Objects
slbClusterTable
slbClusterProbeName
page 26-12
The name of the Server Load Balancing (SLB) cluster.
The name of the Server Load Balancing (SLB) probe.
ip slb probe before you can use this command.
Displays the status and configuration of all Server Load Balancing clus-
ters on a switch.
Configures and deletes SLB probes.
Displays detailed status and configuration information for a single
Server Load Balancing cluster on a switch.
Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012