Ip Slb Server Ip Cluster Probe - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Server Load Balancing Commands

ip slb server ip cluster probe

Configures a probe for a Server Load Balancing (SLB) server.
ip slb server ip ip_address cluster cluster_name probe probe_name
Syntax Definitions
ip_address
cluster_name
probe_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
You must create the probe with the
Examples
-> ip slb server ip 10.255.11.127 cluster corporate_servers probe p_http
Release History
Release 6.1; command was introduced.
Related Commands
show ip slb clusters
show ip slb cluster
ip slb probe
ip slb admin
ip slb cluster
MIB Objects
slbServerTable
slbServerProbeName
OmniSwitch CLI Reference Guide
The IP address for the physical server.
The name of the Server Load Balancing (SLB) cluster.
The name of the Server Load Balancing (SLB) probe.
ip slb probe before you can use this command.
Displays the status and configuration of all Server Load Balancing clus-
ters on a switch.
Displays detailed status and configuration information for a single
Server Load Balancing cluster on a switch.
Configures and deletes SLB probes.
Enables or disables Server Load Balancing on a switch.
Configures Server Load Balancing clusters.
June 2012 page 26-15