Ip Slb Probe Password - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Server Load Balancing Commands

ip slb probe password

Configures a password that is sent to a server as credentials for an HTTP GET to verify the health of the
server.
ip slb probe probe_name {http | https} password password
Syntax Definitions
probe_name
http
https
password
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
The password is encrypted in the configuration file so it is not readable.
Examples
-> ip slb probe web_server http password h1f45xc
Release History
Release 6.1; command was introduced.
Related Commands
ip slb probe
show ip slb probes
MIB Objects
slbProbeTable
slbProbeName
slbProbeMethod
slbProbeHttpPassword
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies the password.
Configures and deletes SLB probes.
Displays the configuration of SLB probes.
June 2012 page 26-27