Xerox ColorQube 9303 Series Service Manual page 625

Table 4 Status messages S to Y
Status
UI Message Code Reason for Message
Tray 4 (Bypass) is not 74-313-00 Tray 4 mechanical fail-
available. Notify your ure
System Administrator
Tray 5 is empty. Add 75-530-00 Tray 5 is out of media
paper
Tray 5 is nearly empty. 75-535-00 Tray 5 media low
Add paper
Tray 5 is not available. 75-313-00 Tray 5 mechanical fail-
Notify the system admin- ure
istrator
Tray 5 is not available. 75-312-00 Tray 5 communications
Notify your system failure
administrator
Tray 5 is open 75-301-00 Tray 5 is open
ColorQube® 9303 Family
Reference / Action UI Message
Switch the machine off then Tray 5 is overloaded.
on, GP 14. Print and copy Remove some paper
services can continue from
other trays if the correct
media is available. Refer to
the following, 74-101-00, 74-
160-00 to 74-161-00 Bypass
Tray 5 is unavailable.
Tray Mis-Feed RAP, 74-120-
Please call for assis-
00 Bypass Tray Guides Move
tance.
in Run RAP and 74-214-00
Bypass Tray Nudger Failure
RAP
Add media. Print and copy
Tray 5 is un-docked
services can continue from
other trays if the correct
media is available. If the
problem persists, perform the
75B RAP
Add media. Print and copy
Tray 5 is undocked.
services can continue from
other trays if the correct
media is available. If the
problem persists, perform the
75B RAP
Tray 5 is not available. Print
Tray 5 lifting
and copy services can con-
tinue from other trays if the
correct media is available. If
the problem persists, perform
Tray 5 lowering
the 75-212-00, 75-215-00
Tray 5 Elevate Up Failure
RAP
Switch the machine off, GP
Tray 6 (inserter) is
14. Check cabling connec-
empty. Add paper
tions. Switch the machine on,
GP 14. Print and copy ser-
Tray 6 (inserter) is
vices can continue from other
empty. Load more media
trays if the correct media is
for insertion.
available. Refer to 75-312-00
RAP
Tray 6 (inserter) is
Close tray. Print and copy
unavailable. Check for
services can continue from
obstructions in the
other trays if the correct
Inserter.
media is available. Refer to
75A RAP
February 2013
2-601
Table 4 Status messages S to Y
Status
Code Reason for Message Reference / Action
75-525-00 Tray 5 is overloaded Remove some media. Print
and copy services can con-
tinue from other trays if the
correct media is available.
Perform
00
92-536-00 Tray 5 communications Switch the machine off then
problems (PfpSerialLink- on,
Safety) to printer. If problem per-
sists, perform the
92-536-00
printing are not available
75-305-00 Tray 5 is undocked Re-dock tray 5 to the
machine. Print and copy ser-
vices can continue from other
trays if the correct media is
available. Refer to
RAP
75-305-01 Tray 5 is undocked Re-dock tray 5 to the
machine. Print and copy ser-
vices can continue from other
trays if the correct media is
available. Refer to
RAP
75-536-00 Tray 5 is lifting No action required. Print and
copy services can continue
from other trays if the correct
media is available
75-537-00 Tray 5 is lowering No action required. Print and
copy services can continue
from other trays if the correct
media is available
12-617-00 Tray 6 (Inserter) detects Add paper to tray 6.
no paper present If the problem persists, per-
form the
12-731-00 Post process inserter Load more media. If the
tray (tray 6) is empty. problem persists, perform the
Jobs will be held if 12J-171
inserts are required.
12-944-00 Inserter capability Check for obstructions in the
degraded inserter. If the problem per-
sists, perform the
171, 12-193-00-171, 12-194-
00-171, 12-196-00-171
and
75-212-00, 75-215-
RAP
GP 14. Check connection
92-535-00,
RAP. Copying and
75-325-00
75-325-00
12J-171 RAP
RAP
12-191-00-
RAP
12J-171 RAP
Status Indicator RAPs
OF 4b