Rep 91.10 Lower Carriage Drive Shaft, Cranks, Lower Front And Rear Compliant Links - Xerox ColorQube 9303 Series Service Manual

Replacement
1. Replacement is the reverse of the removal procedure.
2. Ensure the rotation stop is correctly located when securing the motor to the frame,
2.
Figure 2 Motor Location
3. Run the relevant diagnostic routines, refer to
Repairs/Adjustments
REP 91.9, REP 91.10
Figure
Ensure the motor rotation stop
is located correctly onto the
frame.
GP 37 Post Part Replacement Routines.
February 2013
REP 91.10 Lower Carriage Drive Shaft, Cranks, Lower
Front and Rear Compliant Links
Parts List on PL 91.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Do not touch the exposed face of the printheads. Surface contamination or minor damage can
destroy the printhead.
1. Remove marking unit lower printheads,
2. Remove marking unit lower carriage,
3. Remove the lower drive gear,
Figure 1 Lower drive gear
4-334
WARNING
GP 14. Disconnect the power cord
WARNING
CAUTION
REP 91.29
REP 91.14
Figure 1.
1
Remove the screw
then the drive gear.
ColorQube® 9303 Family