Xerox ColorQube 9303 Series Service Manual page 986

REP 12.85-171 Inserter PWB
Parts List on PL 12.310.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Figure 1 ESD Symbol
Ensure that ESD procedures are observed during the removal and installation of the inserter
PWB.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the inserter rear cover. REP
2. Remove the inserter PWB, Figure 2.
Repairs/Adjustments
REP 12.85-171
WARNING
CAUTION
WARNING
GP 14. Disconnect the power cord
12.83-171.
3
Remove the inserter
PWB.
Replacement
1. Reverse the removal procedures to replace the Inserter PWB.
2. Ensure that the ground strap is secured by one of the fixing screws.
February 2013
4-228
2 1
Remove 4 screws Disconnect all the PJs from
and the ground strap. the PWB.
Figure 2 Inserter PWB
ColorQube® 9303 Family