Xerox ColorQube 9303 Series Service Manual page 1084

4. Remove the front and rear tensioner bases,
2
Remove the e-clip then the
front tensioner base.
Figure 3 Tensioner base removal
Replacement
1. Replacement is the reverse of the removal procedure.
2. Figure 4 shows the correct route for the front and rear belts.
3. Ensure that both carriages are parked and the wiper is in the home position, all the way
up or down.
Repairs/Adjustments
REP 91.4
Figure 3.
1
Remove the e-clip then
the rear tensioner base.
February 2013
4-326
Front Belt
Rear Belt
Figure 4 Belt routing
ColorQube® 9303 Family