Xerox ColorQube 9303 Series Service Manual page 418

A B C
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• Printhead stitch adjust motor 1,
• Marking unit driver PWB,
2. Check the MOT91-029 lead screw,
sary, install a new lead screw.
MOT91-026 runs and printhead 2 moves up or down.
Y N
Perform the following:
1. Refer to WD 9.9 check MOT91-026.
Check the wiring between PJ102 on the
MOT91-026.
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• Printhead roll adjust motor 2,
• Marking unit driver PWB,
2. Check the MOT91-026 lead screw,
sary, install a new lead screw.
MOT91-028 runs and printhead 4 moves up or down.
Y N
Perform the following:
1. Refer to WD 9.9, check MOT91-028.
Check the wiring between PJ102 on the
MOT91-028.
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• Printhead roll adjust motor 4,
• Marking unit driver PWB,
2. Check the MOT91-028 lead screw,
sary, install a new lead screw.
MOT91-024 runs and printhead 1 moves up or down.
A B
Status Indicator RAPs
91-698-00, 91-699-00, 91-706-00, 91-712-00, 91-718-00,
PL 91.25 Item 4.
PL 92.10 Item 4.
PL 91.25 Item 21 for cracks. If neces-
marking unit driver PWB and
PL 91.20 Item 4.
PL 92.10 Item 4.
PL 91.20 Item 21 for cracks. If neces-
marking unit driver PWB and
PL 91.20 Item 4.
PL 92.10 Item 4.
PL 91.20 Item 21 for cracks. If neces-
February 2013
A B
Y N
Perform the following:
1. Refer to WD 9.10, check MOT91-024.
Check the wiring between PJ303 on the
MOT91-024.
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• Printhead roll adjust motor 1,
• Marking unit driver PWB,
2. Check the MOT91-024 lead screw,
sary, install a new lead screw.
MOT91-027 runs and printhead 3 moves up or down.
Y N
Perform the following:
1. Refer to WD 9.10, check MOT91-027.
Check the wiring between PJ303 on the
MOT91-027.
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• Printhead roll adjust motor 3,
• Marking unit driver PWB,
2. Check the MOT91-027 lead screw,
sary, install a new lead screw.
MOT91-033 runs and the upper carriage moves left or right.
Y N
Refer to WD 9.9, check MOT91-033.
Check the wiring between PJ102 on the
033.
Refer to:
• GP 10 How to Check a Motor.
• 01H +24V Power Distribution RAP.
• 01J +50V Power Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary.
• X-axis drive motor upper,
• Marking unit driver PWB,
A B D
2-394
marking unit driver PWB
PL 91.25 Item 4.
PL 92.10 Item 4.
PL 91.25 Item 21 for cracks. If neces-
marking unit driver PWB
PL 91.25 Item 4.
PL 92.10 Item 4.
PL 91.25 Item 21 for cracks. If neces-
marking unit driver PWB and MOT91-
PL 91.20 Item 5.
PL 92.10 Item 4.
ColorQube® 9303 Family
and
and