Xerox ColorQube 9303 Series Service Manual page 301

20-701-00 Fax Phone Book Download Failed RAP
20-701-00 The fax phone book download failed.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Check that the Fax module is correctly grounded.
Procedure
1. Reload the machine software, GP 4.
2. Install a new single board controller,
ColorQube® 9303 Family
WARNING
PL 3.11 Item 13.
20-710-00, 20-711-00 Image Overwrite Error RAP
20-710 Immediate image overwrite error has occurred on the fax card when overwriting the
job.
20-711 On demand image overwrite error has occurred on the fax card when overwriting the
memory.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
• Make a backup of the phone book and the customer settings, refer to
and Restore.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Switch off the machine, then switch on the machine,
Y N
Go to SCP 5 Final Actions.
Clear the fax card NVM. Go to
tion. Perform the routine, All data. The fault is cleared.
Y N
Perform an Altboot, GP 4. The fault is cleared.
Y N
Install new components as necessary:
• Fax module, PL 20.05 Item
• Install a new single board controller PWB,
Go to SCP 5 Final Actions.
Go to SCP 5 Final Actions.
February 2013
2-277
WARNING
GP 14. Disconnect the power cord. Electricity can cause
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 14. The fault still occurs.
dC301 NVM Initialization. Select Embedded Fax NVM initializa-
1.
PL 3.11 Item
Status Indicator RAPs
20-701-00, 20-710-00, 20-711-00
dC361 NVM Save
13.