Rep 12.5-171 Right Side-Cover Removal - Xerox ColorQube 9303 Series Service Manual

REP 12.5-171 Right Side-Cover Removal

Parts List on PL 12.105.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. With the machine powered on, use the PTU or
2. Remove Bin 1, REP 12.4-171.
3. If a HVF unit only, remove the middle right side cover,
If a HVF BM unit installed, remove the HVF BM bin 2 assembly,
Repairs/Adjustments
REP 12.5-171
WARNING
WARNING
GP 14. Disconnect the power cord
dC330 code 12-242 to lower Bin 1.
PL 12.105 Item 17.
PL 12.190 Item
4. Remove the right side-cover,
8.
Replacement
The replacement procedure is the reverse of the removal procedure.
February 2013
4-130
Figure 1.
Figure 1 Right side cover removal
ColorQube® 9303 Family
2
Remove the right
side cover.
1
Remove 8
screws.