Xerox ColorQube 9303 Series Service Manual page 526

Table 1 PEST codes and action
Code Hard/Soft Action
99-612 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-613 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-614 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-615 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-616 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-617 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-618 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-619 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-620 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-621 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-622 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-623 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-624 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-625 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
Status Indicator RAPs
99-611-00 to 99-625-00, 99-626-00 to 99-640-00
99-626-00 to 99-640-00 PEST Error 27 RAP
99-626-00 Solenoid, ink dose valve H1 yellow short.
99-627-00 Solenoid, ink dose valve H1 black short.
99-628-00 Solenoid, ink dose valve H2 cyan short.
99-629-00 Solenoid, ink dose valve H2 magenta short.
99-630-00 Solenoid, ink dose valve H2 yellow short.
99-631-00 Solenoid, ink dose valve H2 black short.
99-632-00 Solenoid, ink dose valve H3 cyan short.
99-633-00 Solenoid, ink dose valve H3 magenta short.
99-634-00 Solenoid, ink dose valve H3 yellow short.
99-635-00 Solenoid, ink dose valve H3 black short.
99-636-00 Solenoid, ink dose valve H4 cyan short.
99-637-00 Solenoid, ink dose valve H4 magenta short.
99-638-00 Solenoid, ink dose valve H4 yellow short.
99-639-00 Solenoid, ink dose valve H4 black short.
99-640-00 Solenoid, ink purge valve H1 below min.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Code Hard/Soft Action
99-626 Hard Go to the
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
February 2013
2-502
WARNING
GP 14. Disconnect the power cord. Electricity can cause
Table 1 PEST codes and action
93A Ink Melt Reservoir Check RAP. Check the DC cabling to
ColorQube® 9303 Family