Xerox ColorQube 9303 Series Service Manual page 378

A
• Registration / preheat assembly,
• Media path driver PWB, PL 1.15 Item
Perform the following actions:
• Check for wiring damage or obstructions preventing jam clearance hatch movement.
Refer to REP 89.1.
• If the error persists, install a new registration / preheat assembly
Reg / preheat home sensor Q89-004
(mounted on the PWB)
Figure 1 Component location
Status Indicator RAPs
89-520-00
PL 88.10 Item 1.
5.
PL 88.10 Item 1.
Sensor flag on
the drive gear
February 2013
2-354
Rotate the drive shaft
Figure 2 Component location
ColorQube® 9303 Family