Xerox ColorQube 9303 Series Service Manual page 254

Table of Contents

16-628-07, 16-628-35, 16-628-46, 16-628-66, 16-628-67

Range Environment Variable RAP

16-628-07 Range environment variable not set. Set to invalid numeric string.

16-628-35 Range environment variable not set. Set to invalid numeric string.

16-628-46 Range environment variable not set. Set to invalid numeric string.

16-628-66 Range environment variable not set. Set to invalid numeric string.

16-628-67 Range environment variable not set. Set to invalid numeric string.

Ensure that the electricity to the machine is switched off while performing tasks that do

not need electricity. Refer to

14. Disconnect the power cord. Electricity can cause

death or injury. Moving parts can cause injury.

For a single occurrence, switch off the machine, then switch on the machine,

For multiple occurrences, reinstall software,

Status Indicator RAPs

16-628-07, 16-628-35, 16-628-46, 16-628-66, 16-628-67,

16-628-09, 16-629-11, 16-629-26, 16-629-46, 16-629-67, 16-

629-68, 16-629-92, 16-629-93 No Acknowledgment For RPC

16-628-09 Unable to complete RPC call.

16-629-11 Fault service call to PSW callback failed.

16-629-26 Fault service call to PSW callback failed.

16-629-46 No acknowledgment for RPC message.

16-629-67 No acknowledgment for RPC message.

16-629-68 No acknowledgment for RPC message.

16-629-92 No acknowledgment for RPC message. RPC time out calling program received void

response due to corrupt RPC.

16-629-93 No acknowledgment for RPC message. RPC time out calling program received void