Rep 5.11 Exit Sensor - Xerox ColorQube 9303 Series Service Manual

Replacement
The replacement is the reverse of the removal procedure. Make sure that the torsion spring is
installed correctly, Figure 2.
Figure 2 Torsion spring location
Repairs/Adjustments
REP 5.10, REP 5.11
Torsion spring
location.

REP 5.11 Exit Sensor

Parts List on PL 5.30
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Raise the DADH.
Be careful to prevent damage to the document pad when the document pad is removed from
the baffle assembly.
February 2013
4-48
WARNING
GP 14. Disconnect the power cord
CAUTION
ColorQube® 9303 Family