Xerox ColorQube 9303 Series Service Manual page 527

Table 1 PEST codes and action
Code Hard/Soft Action
99-627 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-628 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-629 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-630 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-631 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-632 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-633 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-634 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-635 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-636 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-637 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-638 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-639 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-640 Soft Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
ColorQube® 9303 Family
99-641-00 to 99-655-00 PEST Error 28 RAP
99-641-00 Solenoid, ink purge valve H2 below min.
99-642-00 Solenoid, ink purge valve H3 below min.
99-643-00 Solenoid, ink purge valve H4 below min.
99-644-00 Solenoid, ink dose valve H1cyan below min.
99-645-00 Solenoid, ink dose valve H1 magenta below min.
99-646-00 Solenoid, ink dose valve H1 yellow below min.
99-647-00 Solenoid, ink dose valve H1 black below min.
99-648-00 Solenoid, ink dose valve H2 cyan below min.
99-649-00 Solenoid, ink dose valve H2 magenta below min.
99-650-00 Solenoid, ink dose valve H2 yellow below min.
99-651-00 Solenoid, ink dose valve H2 black below min.
99-652-00 Solenoid, ink dose valve H3 cyan below min.
99-653-00 Solenoid, ink dose valve H3 magenta below min.
99-654-00 Solenoid, ink dose valve H3 yellow below min.
99-655-00 Solenoid, ink dose valve H3 black below min.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Code Hard/Soft Action
99-641 Soft Go to the
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
February 2013
99-626-00 to 99-640-00, 99-641-00 to 99-655-00
2-503
WARNING
GP 14. Disconnect the power cord. Electricity can cause
Table 1 PEST codes and action
93A Ink Melt Reservoir Check RAP. Check the DC cabling to
Status Indicator RAPs