Xerox ColorQube 9303 Series Service Manual page 367

B
• Drive gears, PL 82.15.
Enter dC140 Analog Monitor. Select 82-102 horizontal transport motor encoder (M6). Press
Start. The number of ticks (i.e. 36 ticks) will flash on the display and then return to show 0 ticks.
Repeat by selecting stop and then start on the popup menu, the number only remains for a few
seconds. The number of ticks is displayed.
Y N
Go to WD 8.5. Check horizontal transport motor (M6), MOT82-003 and the encoder wire
harness. Refer to:
• GP 10 How to Check a Motor.
• PJ905, Media path driver PWB.
• 01D +5V Distribution RAP.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Horizontal transport motor (M6),
• Media path driver PWB, PL 1.15 Item
Enter dC330 code 82-007 nip C release solenoid, SOL 82-007, press start. The
energizes.
Y N
Go to WD 8.1, check SOL 82-007, refer to:
• GP 12 How to Check a Solenoid or Clutch
• PJ405 Media Path Driver PWB.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Nip C release solenoid, PL 82.15 Item
• Media path driver PWB, PL 1.15 Item
Enter dC330 code 82-008 nip D release solenoid, SOL 82-008, press start. The
energizes.
Y N
Go to WD 8.3, check SOL 82-008, refer to:
• GP 12 How to Check a Solenoid or Clutch
• PJ405 Media Path Driver PWB
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• Nip D release solenoid, PL 70.30 Item
• Media path driver PWB, PL 1.15 Item
Enter dC330 code 83-004 HPP diverter solenoid, SOL 83-004, press start. Ensure that the
HPP diverter gate moves fully when the solenoid is energized and returns fully when the sole-
noid is generalized. The solenoid energizes and the diverter gate moves correctly.
ColorQube® 9303 Family
PL 82.15 Item 9.
5.
4.
5.
13.
5.
Y N
Go to WD 8.1, check SOL 83004. Refer to:
• GP 12 How to Check a Solenoid or Clutch
• PJ303 Media Path Driver PWB.
• 01J +50V Distribution RAP.
• 01L 0V Distribution RAP.
Install new components as necessary:
• HPP diverter solenoid,
• Horizontal paper path assembly,
• Media path driver PWB,
Check the bearings, drive shaft's and nip rolls on the exit paper path,
Install new components as necessary.
solenoid
solenoid
February 2013
83-112-00, 83-115-00, 83-116-00, 83-117-00, 83-119-
2-343
PL 82.15 Item 5.
PL 82.15 Item 1.
PL 1.15 Item 5.
PL 10.15.
Status Indicator RAPs