Xerox ColorQube 9303 Series Service Manual page 236

16-608-26 Fault Service Failed to Unbind RAP
16-608-26 Fault service failed to unbind with SC
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. If a single occurrence, reinstall software,
2. For multiple occurrences, first check the harness connections then if problem persists
install a new HDD, PL 3.11 Item 2.
Status Indicator RAPs
16-608-26, 16-608-28 to 16-608-67
WARNING
GP 4.
16-608-28 to 16-608-67 Unable to Free IPC Resources RAP
16-608-28 IPC unregister fail
16-608-35 Unable to free IPC resources
16-608-38 Unable to unregister as IPC server
16-608-46 Unable to free IPC resources
16-608-66 Unable to free IPC resources
16-608-67 Unable to free IPC resources
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
1. If a single occurrence, take no action.
2. For multiple occurrences, switch off the machine, then switch on the machine,
3. If the fault remains, reinstall software,
February 2013
2-212
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 4.
ColorQube® 9303 Family
GP 14.