Rep 5.4 Input Tray Assembly - Xerox ColorQube 9303 Series Service Manual

REP 5.4 Input Tray Assembly

Parts List on PL 5.35
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the DADH, REP 5.19.
2. Remove the feed assembly, REP 5.3.
NOTE: To release the tension of the drive belts, refer to
Repairs/Adjustments
REP 5.4
WARNING
GP 14. Disconnect the power cord
WARNING
ADJ 5.1.
3. Remove the input tray assembly,
6
Release the
harness.
5
Disconnect
PJ190.
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 5.1 DADH Drive Belt Adjustment.
February 2013
4-40
Figure 1.
7
Remove 3
self tapping
screws
marked A.
8
Remove the
input tray
assembly.
3
4
Disconnect
Release the
the ground
tension and
harness.
disengage the
drive belt.
Figure 1 Input tray assembly
ColorQube® 9303 Family
1
Loosen the
screw.
2
Release the
tension on the
feed motor
drive belt.