Xerox ColorQube 9303 Series Service Manual page 948

9. Figure 1, Release the crease roll assembly at the rear.
2
Remove E-clip and release the
arm.
NOTE: Flat washer between
the bearing and arm
Figure 1 Release the assembly at the rear
Repairs/Adjustments
REP 12.52-171
1
Remove 3 screws.
February 2013
4-190
10. Figure 2, Release the crease roll assembly at the front.
2
Remove the E-clip and release the arm.
NOTE: Flat washer between the bearing
and arm
Figure 2 Release the assembly at the front
1
Remove 3 screws.
ColorQube® 9303 Family