Xerox ColorQube 9303 Series Service Manual page 988

REP 12.87-171 Inserter Top Cover Interlock Switch
Parts List on PL 12.305.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the Inserter front cover, REP
2. Remove the top cover interlock switch,
Figure 1 Top Cover Interlock Switch
Replacement
Reverse the removal procedures to replace the Inserter top cover interlock switch.
Repairs/Adjustments
REP 12.87-171, REP 12.88-171
WARNING
WARNING
GP 14. Disconnect the power cord
12.83-171.
Figure 1.
1
Disconnect the harness.
2
Remove 2 screws, then
remove the switch.
REP 12.88-171 Inserter Jam Cover Interlock Switch
Parts List on PL 12.300.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the Inserter front and rear covers,
2. Remove the inserter motor,
February 2013
4-230
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.83-171.
REP 12.84-171.
ColorQube® 9303 Family