Rep 10.15 Duplex Start Sensor (13) - Xerox ColorQube 9303 Series Service Manual

REP 10.15 Duplex Start Sensor (13)

Parts List on PL 10.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the exit paper path, REP 10.20.
2. Remove the diverter gate, REP 10.13.
3. Remove the paper guide, Figure 1.
Figure 1 Paper guide removal
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
1
With the jam clearance door opened, release the
3 retaining tabs. Then remove the inner paper
guide.
4. Remove the duplex sensor,
February 2013
4-83
Figure 2.
1
Remove the sensor then
disconnect the harness.
Figure 2 Sensor removal
Repairs/Adjustments
REP 10.15