Xerox ColorQube 9303 Series Service Manual page 271

Table of Contents

Advertisement

16-758-35, 16-758-46, 16-758-47, 16-758-66, 16-758-67, 16-
758-93, 16-759-09, 16-759-14, 16-759-19, 16-759-26 Service
Run Loop Failed RAP
16-758-35 Unable to change EJS state to offline.
16-758-46 Failed setting up monitor routine with registration service.
16-758-47 Error searching for job ID during print job submission. Print submission tool failed.
16-758-66 Service run loop failed.
16-758-67 Service loop failed.
16-758-93 Unable to obtain data store object handle.
16-759-09 Software error.
16-759-14 Request for wildcard from non-NC
16-759-19 Network controller failed cold reset 3 times in a row.
16-759-26 Service requesting information of fault service. Software error.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1.
For a single occurrence, switch off the machine, then switch on the machine,
2.
For multiple occurrences, reinstall software,
ColorQube® 9303 Family
WARNING
GP
4.
16-759-46, 16-759-47, 16-759-66, 16-759-67, 16-759-93, 16-
760-09, 16-760-14, 16-760-19, 16-760-26, 16-760-46 Fail to
Enable Process RAP
16-759-46 Process no in correct state, O/S failure.
16-759-47 Failed to abort the requested process.
16-759-66 OA event register failed.
16-759-67 OA event register failed.
16-759-93 Unable to create.dat file.
16-760-09 Software error. Check fault log for more specific reasons.
16-760-14 Software error. Calling service not registered.
16-760-19 Any network controller start up.
16-760-26 Software failure.
16-760-46 Software failure.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
GP
14.
1.
For a single occurrence, switch off the machine, then switch on the machine,
2.
For multiple occurrences, reinstall software,
February 2013
16-758-35, 16-758-46, 16-758-47, 16-758-66, 16-758-
2-247
WARNING
GP
14. Disconnect the power cord. Electricity can cause
GP
4.
Status Indicator RAPs
GP
14.

Advertisement

Table of Contents
loading

Table of Contents