Rep 5.1 Top Cover Assembly - Xerox ColorQube 9303 Series Service Manual

REP 5.1 Top Cover Assembly

Parts List on PL 5.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Open the DADH top cover.
2. Remove the DADH top cover assembly,
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
Figure 1.
3
Remove the 2 latch pins.
Take note of the position of
latch pins.
2
Remove the screw and
the plastic bushing (front
and back).
Replacement
The replacement is the reverse of the removal procedure. Make sure the latch pins are
installed correctly, refer to Figure
February 2013
4-37
4
Remove the top
cover assembly.
1
Disengage the hinges.
Figure 1 Top cover
1.
Repairs/Adjustments
REP 5.1