Xerox ColorQube 9303 Series Service Manual page 800

3
Disengage the lugs in the
lower cover.
4
To help the removal of the
baffle assembly, slide the
lower cover approximately 40
mm (1.5 inches) away from
the document pad.
Figure 2 Lower cover movement
9. Disconnect PJ196 from the exit sensor and remove the exit sensor,
Take care removing the baffle assembly, do not damage the solenoid link arm.
Repairs/Adjustments
REP 5.5
DADH frame.
2
Remove 2 screws.
1
Carefully remove the left hand
end of the document pad from the
baffle assembly.
REP 5.11.
CAUTION
10. Remove the baffle assembly,
February 2013
4-42
Figure 3.
2
Disengage the hinge
pin.
3
Slide the tab through
slot in DADH frame.
4
Remove the baffle
assembly.
1
Feed the harness and
ground harness through the
frame.
Solenoid link arm.
Figure 3 Baffle assembly
ColorQube® 9303 Family