Xerox ColorQube 9303 Series Service Manual page 502

99-081-00 to 99-112-00 PEST Error 2 RAP
99-081-00 Wave amp cable, VPP or VSS head 1 open.
99-082-00 Wave amp cable, VPP or VSS head 2 open.
99-083-00 Wave amp cable, VPP or VSS head 3 open.
99-084-00 Wave amp cable, VPP or VSS head 4 open.
99-085-00 Wave amp cable, VPP or VSS head 1 short.
99-086-00 Wave amp cable, VPP or VSS head 2 short.
99-087-00 Wave amp cable, VPP or VSS head 3 short.
99-088-00 Wave amp cable, VPP or VSS head 4 short.
99-100-00 Board link, DDB safe mode.
99-110-00 Solenoid, DMU valve over current.
99-111-00 Stripper solenoid over current.
99-112-00 Pump, DMU delivery over current.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST Hard and Soft Fault Codes
Code Hard/Soft Action
99-081 Hard Go to 91-610-00 to
cables to printhead 1.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
99-082 Hard Go to 91-610-00 to
cables to printhead 2.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
Status Indicator RAPs
99-081-00 to 99-112-00
WARNING
91-613-00. Check the video and wave amp
91-613-00. Check the video and wave amp
Table 1 PEST Hard and Soft Fault Codes
Code Hard/Soft Action
99-083 Hard Go to
cables to printhead 3.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
99-084 Hard Go to
cables to printhead 4.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
99-085 Hard Go to
cables to printhead 1.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
99-086 Hard Go to
cables to printhead 2.
The fault indicates a failure of the wave amp power signals
between the wave amp PWB and the IME controller PWB.
99-087 Hard Go to
cables to printhead 3.
The fault indicates a failure of the wave amp power signals
between the quad wave amp PWB and the IME controller PWB.
99-088 Hard Go to
cables to printhead 4.
The fault indicates a failure of the wave amp power signals
between the wave amp PWB and the IME controller PWB.
99-100 Hard Safe mode indicates a firm ware mismatch. Check code version
and upgrade or revert as appropriate. If problem continues install a
new drum driver PWB,
99-110 Hard Go to
99-111 Hard Install a new drum driver PWB,
99-112 Hard Go to
and the drum driver PWB.
February 2013
2-478
91-610-00 to 91-613-00. Check the video and wave amp
91-610-00 to 91-613-00. Check the video and wave amp
91-610-00 to 91-613-00. Check the video and wave amp
91-610-00 to 91-613-00. Check the video and wave amp
91-610-00 to 91-613-00. Check the video and wave amp
91-610-00 to 91-613-00. Check the video and wave amp
PL 1.15 Item 4.
94-505-00 RAP.
PL 1.15 Item 4.
94-505-00 RAP. Check the wiring between the cleaning unit
ColorQube® 9303 Family